Monthly Archives: October 2021

Scaffolding vs. Scissor Lift: Which Is Better?

Scaffolding vs. Scissor Lifts

Working at height requires a keen focus on safety. This starts with having the right equipment for keeping workers safe on the job. For years, scaffolding was the safest way to work above ground. But since the invention of scissor lifts and other aerial lifts, scaffolding has taken a back seat when it comes to worker safety.

It pays to know the ins and outs of the scaffolding vs. scissor lift debate. That way, your business can determine if scaffolding, scissor lifts, or a combination of the two best suits your workforce. 

Of course, if you require workers to complete tasks at heights, it is beneficial to provide these employees with aerial and scissor lift certification training. This ensures your workers can gain insights into the scaffolding vs. scissor lift debate. They can also get answers to important questions regarding scissor lift and scaffolding safety.  

What Is a Scissor Lift?

Scissor lifts are designed to help workers move safely at heights. They move vertically via a lifting mechanism that elevates or lowers a work platform as needed.OSHA requires anyone who uses a scissor lift at a U.S. worksite to earn certification. This verifies an operator knows different ways to utilize a scissor lift safely. It confirms the operator knows about scaffolding safety as well. 

aerial lift certification

What Is Scaffolding?

A scaffold is a temporary work platform designed to help employees safely perform tasks at heights. It is frequently used in construction. 

There are several types of scaffolding. These include:

  • • Single 
  • • Double 
  • • Cantilever 
  • • Suspended 
  • • Ladder or Trestle 
  • • Mobile  

Businesses that use scaffolding must operate in accordance with OSHA requirements. Failure to do so can result in OSHA fines and penalties. It can also lead to falls from heights, along with associated accidents, injuries, and fatalities. 

OSHA requires businesses to have scaffold guardrails or a fall arrest system if employees work at 10 ft. or higher. In instances where a worker is using a single- or two-point adjustable suspension scaffold, there must be a guardrail and personal fall arrest system in place. 

Furthermore, OSHA stipulates that all scaffold platforms must be decked or planked. OSHA requires scaffold components to support at least four times their maximum intended load. It states that scaffolding rigging must be able to handle at least six times its designated load, too. 

Only a “competent” employee can use scaffolding as well. This employee must receive OSHA-compliant training that verifies he or she can leverage scaffolding properly. 

Scissor Lift vs. Scaffolding: Things to Consider

A scissor lift can be used as a scaffold work platform. It can provide the same benefits of scaffolding and lower your risk of worker falls from heights

OSHA has established various standards for scissor lift scaffolding safety, including:

– 27: Outlines safety measures for general industry scaffolding and rope descent systems

– 20(b): Defines scissor lift accident prevention responsibilities in the construction industry

– 454: Clarifies the training requirements for construction workers who use scissor lift scaffolding

It is an employer’s responsibility to teach workers how to properly use a scissor lift. With comprehensive training, workers can learn how to safely use a scissor lift and minimize the risk of associated accidents and injuries. They can also learn about scaffold lift differences.

Scaffold Lift Differences: What You Need to Know

scaffoldingAerial and scissor lifts may seem identical at first, but there are notable differences between the two. With the ability to spot the differences between aerial and scissor lifts, workers can safely use the correct lift for the task at hand. 

OSHA defines an aerial lift as any vehicle-mounted device used to elevate a worker. Aerial lifts offer mobility and flexibility, and as such, have replaced ladders and scaffolding at many worksites. They can also move vertically and horizontally. 

Comparatively, a scissor lift is a scaffold work platform used to move workers vertically, according to OSHA. Scissor lifts are commonly used in construction, retail, and other industries for tasks that require workers to move up and down. 

Regardless of whether an employer uses aerial lifts, scissor lifts, or both, safety training is crucial. By educating its workers about scaffold lift differences, an employer can help these workers stay safe when they use different lifts for everyday work.

Scaffolding vs. Scissor Lift: Which Works Best?

Employers must evaluate scissor lifts and traditional scaffolding to find a safe, effective option for their worksites. Upon close evaluation, employers often find that scissor lifts are superior options in comparison to traditional scaffolding for several reasons, including:

1. You can enjoy greater access.

Scissor lifts can be used nearly the same ways as scaffolding, and scissor lift features like all-terrain wheels and self-leveling make them easy to operate at a wide range of jobsites. Plus, scissor lifts can often go where scaffolding cannot.

2. You can guard against worker accidents and injuries.

Scaffolding and ladders are risky, due to the fact that their bases are less stable in comparison to scissor lifts (which use outriggers for increased stability). Also, scaffolding and ladders do not provide as much grip in wet or adverse weather in contrast to scissor lifts. 

3. You can boost public safety.

A scissor lift makes it simple for workers to safely navigate to a jobsite. Many scissor lifts also require less space than scaffolding, and they can be taken down and moved quickly.

4. You can help workers get the job done faster and more efficiently than ever before.

Scissor lifts can be lowered and moved to another location in just minutes. The end result: reduced labor time and increased productivity.

5. You can lower your operating costs.

Scissor lifts can be lowered and moved to storage with much less time and labor than scaffolding.

6. You won’t have to worry about emissions.

Scissor lifts with electric engines produce no harmful emissions.

Scaffolding Dangers to Consider

Clearly, there are many reasons to choose scissor lifts over scaffolding. Along with the aforementioned reasons, businesses may shy away from scaffolding for a variety of reasons, such as:

Risk of Falls

OSHA mandates the use of fall protection when working at 10 ft. or more. Yet, when using scaffolding, contractors often insist on fall protection starting at 6 ft. This is due to the risk of falls associated with poor weather conditions, lack of focus on safety procedures, and improper access to worksites. 

Scaffold Collapse

When scaffolds aren’t erected correctly, the platform can collapse or result in falling items. Proper setup must take many factors into account, such as the weight the scaffold will hold and stability of the foundation. Other setup factors to consider include placement of scaffold planks and the distance from the scaffold to the work area. Proper scaffold setup requires a highly trained worker who knows how to erect, dismantle, and move a scaffold.

Incorrect Planking

When setting up a scaffold, all planks must be cleated and tightly secured. Otherwise, they can slip off. Falling planks can also injure people below. Planking accidents can result from overloading and using the wrong grade of lumber as well. Furthermore, too little or too much overhang can cause planking to tip.

Failure to Inspect

OSHA requires scaffolding to be inspected on a regular basis. Inspections should be done by workers trained in scaffolding setup, dismantling, and maintenance.

Benefits of Aerial Lift Scaffolding and Scissor Lift Scaffolding

OSHA classifies scissor lifts and aerial lifts as scaffolding. However, scissor lifts provide mobility and versatility that traditional scaffolding does not. 

Scissor lift scaffolding and aerial lift scaffolding offer many advantages over traditional scaffolding, such as: 

– Fast setup and movement

– Can be used indoors and outdoors

– Can safely handle more weight than traditional scaffolding

– Provide ample room for tools and equipment

– Can be quickly lowered in high winds or rain

– Easy to pause at different heights

– Can be used on different surfaces

– Can provide access to difficult terrains

– Available in electric and diesel options

Ultimately, scissor lift scaffolding is the smart choice over traditional scaffolding. Scissor lift scaffolding provides better access, more mobility and terrain compatibility, and other benefits that traditional scaffolding cannot match.

The Bottom Line on the Scaffolding vs. Scissor Lift Debate

Scissor lifts cannot stop accidents ⁠— that’s why scissor lift operator training and certification is important. 

Thanks to CertifyMeOnline.net, workers can immediately earn their scissor lift operator. We offer an affordable and efficient training program to help workers gain the skills they need to safely operate scissor lifts. 

Our online certification training is developed in alignment with OSHA requirements. It is designed for workers of all skill and experience levels. And our training makes it easy for workers to earn their scissor lift certification in as little as one day. 

aerial lift certification

Choose CMO for Scissor Lift Certification

Your company may use scissor lifts, scaffolds, or a combination of the two. But every time your workers complete tasks at heights, they risk falling. Without sufficient safety training, these employees can endanger themselves or others. If your business does not comply with OSHA standards, it can receive OSHA violations as well. 

CMO offers best-in-class scissor lift certification training. We make it simple for your scissor lift operators to work according to OSHA standards. Our team will ensure your business complies with OSHA standards at all times. 

To learn more or to sign up for our training and certification classes, please contact us online or call us today at (602) 277-0615.

What Are the Best Aerial Lift Accessories?

aerial lift accessories

Aerial lift accessories serve many purposes. Some accessories increase aerial lift safety. Others help operators work comfortably at heights. Various accessories enable operators to become more productive and efficient than ever before, too. 

Your business can browse and purchase spill guards, tool trays, and other accessories for aerial lifts. But some of these accessories are essential. Meanwhile, other accessories are not. 

Many aerial lift accessories are available to help your workers get the most value out of your aerial lift. Yet, the sheer volume of available boom lift accessories can make it difficult to determine which ones are necessary.

Ultimately, it is your company’s responsibility to figure out what accessories its aerial lift operators need to complete everyday tasks safely. Now, let’s answer some of the biggest questions surrounding aerial lift accessories, so your business can determine which ones are essential for your operators. 

What Aerial Lift Accessories Do Your Workers Need?

Here’s a look at modern aerial lift accessories and how they can help you improve aerial lift performance and safety.

1. Secondary Guarding System

The Genie Lift Guard™ Contact Alarm is an optional electronic secondary guarding solution. It works when an obstruction makes contact with a Genie lift to alert the operator, occupants, and ground personnel about the incident.

To use the alarm, an operator only needs to press down on the device’s footswitch. At this point, the alarm is activated, and it will deliver notifications. Meanwhile, to reset the alarm, an operator can click the device’s activation cable into place.

Installation of the alarm usually takes less than 30 minutes, and it requires a few fasteners and electrical harness connectors. Upon completion, the alarm will continue to perform consistently — and help lower the risk of aerial lift accidents.

2. Platform Mesh

Genie Lift Guard™ Platform Mesh is quickly becoming a must-have for those who need aerial lift accessories. The mesh provides a screen that helps prevent objects from falling at aerial worksites.

The platform mesh is fully encapsulated at the aerial lift platform’s top rail to beneath the bottom. Also, the mesh is constructed from durable materials, so it can withstand rain, wind, and other harsh weather conditions.

Typical installation of the platform mesh requires about 10 minutes. After the mesh is installed, it can help reduce the risk of objects falling from an aerial lift that otherwise can endanger workers, bystanders, and property.

3. Bucket Hanging Step

In terms of boom lift accessories, a bucket hanging step is crucial. It provides a hanging, repositionable step that enables workers to get in and out of a bucket on a bucket truck.

A hanging step slips right onto the lip of a bucket to provide workers with a step that helps improve stability and prevent falls. It can fit onto buckets made with or without liners and is constructed with multiple layers of fiberglass to ensure strength and durability.

To install a hanging step, put the step over the bucket lip on the inside or outside of the bucket. Reposition the step when entering or leaving the bucket, and you can continuously use the step safely.

4. Pipe/Rebar Rack or Board Carrier for Scissor Lifts

Scissor lift accessories can deliver exceptional results — just consider the DRX multi® materials attachment from British company Aerial and Handling Services. 

Specifically designed for scissor lifts, DRXmulti® looks like a metal bar fitted with four vertical metal bars that attach to the side of a scissor lift. It is designed to hold tools and piping to free up space on an aerial lift platform and reduce trip hazards for workers. 

DRXmulti® can be installed on any scissor lift make and model of scissor lifts. The device also weighs about 30 lbs., and it can be positioned in under 5 minutes and removed in less than 60 seconds.

aerial lift certification

What Aerial Lift Bucket Accessories Do Your Workers Need?

Along with aerial lift accessories, you can purchase or rent bucket accessories. Popular aerial bucket accessories include:

1. Tool Holder

A tool holder makes it simple for an aerial lift operator to keep essential tools at arm’s length. Most tool holders are water-repellent and resistant to the sun’s ultraviolet (UV) rays. Plus, they offer ample space for anchors, clamps, drill bits, and other tools.

2. Cover

A cover offers protection to aerial lift operators who complete tasks outdoors. The cover safeguards lift operators against extreme sunlight or excessive rain. A typical cover can be set up in less than a minute, and it ensures that aerial lift operators can work safely and comfortably in a wide range of weather conditions.

3. Chainsaw Holder

A chainsaw holder lets an aerial lift operator mount their standard or hydraulic pistol grip chainsaw to a bucket. It can simultaneously extend the life of a chainsaw blade and ensure a lift operator can safely use a chainsaw at heights.

Evaluate aerial bucket accessories to determine which ones are suitable for a worksite. Next, you can pick up bucket accessories to help aerial lift operators perform day-to-day tasks safely and effectively.

Can You Rent Accessories for an Aerial Lift?

Aerial lift accessories are available for rent, including:

1. Personal Fall Arrest System

A personal fall arrest system enables an aerial lift operator to walk outside of the platform. The system includes a body harness, anchorage, and connector. Together, these components help limit an aerial lift operator’s fall distance and their body’s deceleration force if he or she slips or trips. 

2. Glass and Panel Tray Kit

A glass and panel tray kit enables aerial lift operators to safely store glass and panels outside of a lift. In doing so, the kit helps protect glass and panels from bumping into the lift or cracking or falling.

3. Gravity Assist Tool Support Arm

A gravity assist tool attachment attaches directly to an aerial lift and helps an operator use power tools to complete tasks at heights. The attachment holds a power tool in place to reduce the risk that an operator will drop the tool or get injured from strain.

Aerial lift accessory rental costs vary, and you may be charged a daily, weekly, or monthly rate, depending on how long you need various accessories.

Tips for Choosing Boom Lift Accessories

aerial liftsThe aforementioned accessories for aerial lifts can be valuable if you know how to use them properly. However, you must consider your worksite requirements before you invest in boom lift accessories, so you can select the right accessories for your job.

In addition, it is paramount to consider the wellbeing and safety of all workers, regardless of whether they will be using aerial lift accessories. A workplace accident can have far-flung effects on workers, and you need to evaluate scissor lift accessories and other types of accessories accordingly.

With any boom lift accessories you buy, they must be properly installed and maintained as well. Otherwise, if an accessory does not perform correctly, it can increase the risk of on-the-job accidents.

The accessories you purchase for your aerial lift are vital for workers. If you plan to buy accessories, perform a thorough evaluation and look beyond an accessory’s price.

You should also provide workers with instructions that teach them how to use aerial lift accessories. If workers receive aerial lift accessory training, they can use different accessories to improve their performance and limit on-the-job accidents.

How to Teach Workers About Scissor Lift Accessories Safety

Accessories for aerial lifts include instructions. And aerial lift operators must review these instructions before use. This ensures operators know how to correctly utilize accessories from the get-go. It also confirms operators understand how to maintain accessories and get the most value out of them. 

If there are any concerns or questions regarding proper use of accessories for aerial lifts, seek out assistance. Generally, an accessory manufacturer can offer assistance. It can be helpful to get in touch with an accessory supplier as well. 

Meanwhile, if an aerial lift accessory looks worn down or damaged, workers should err on the side of caution. At this point, a worker should notify their supervisor and ensure the accessory is taken out of use. The accessory can then be repaired or replaced. Furthermore, there is no risk that a defective accessory could put an aerial lift operator or others in danger. 

Aerial lift certification training can play an important part in a workplace safety program, too. By enrolling workers in OSHA-approved aerial lift certification training, they can learn about different types of accessories. These workers can then earn aerial lift certification and guard against aerial lift hazards.  

aerial lift certification

Capitalize on Aerial Lift Certification Training

Aerial lift operators must have a valid license to work at any U.S. jobsite. Thanks to OSHA-approved aerial lift certification training, a worker can earn this license. Next, this worker can operate an aerial lift in alignment with OSHA standards. He or she should have no trouble safely using accessories for aerial lifts, too. 

When it comes to scissor lift accessories, safety is critical. Aerial lift accessories safety training is available from CertifyMeOnline.net, a leading provider of aerial lift safety training programs.

We offer comprehensive aerial lift safety training courses designed for workers of all experience levels. Each course teaches workers about aerial lift safety, and it provides tips and strategies they can use to enhance on-the-job safety.

Our course catalog includes aerial lift, fall protection, and scissor lift certification offerings. We also provide a Train the Trainer program and hands-on training for aerial and scissor lifts. There is even forklift certification training available from CertifyMe.net, our sister site. 

To learn more about our aerial lift safety training courses, please contact us online or call us today at (602) 277-0615.

The 5 Most Common Aerial Lift Accidents

aerial lift accidents

Aerial lift operators must prioritize safety. When workers aren’t properly trained to operate an aerial lift, accidents can occur. Some aerial lift accidents can cause injuries, and others can be fatal.

Employers must provide aerial lift operator certification training. This ensures aerial lift operators are OSHA-certified. It also confirms that these operators know about common accidents involving aerial lifts. 

A Closer Look at Aerial Lift Accidents

Aerial lift accidents can occur without notice and wreak havoc on a business, its employees, and its customers. Common categories of aerial lift accidents include:

1. Boom Lift Accidents

Boom lifts can fall over, and when they do, produce some of the highest aerial lift accidents due to their height and horizontal reach.

2. Scissor Lift Accidents

A scissor lift accident is often caused by driving and working on uneven ground or falls and tip-overs that occur due to severe weather.

3. Manlift Accidents

Falls, tip-overs, and collapses are among the top dangers that can lead to manlift accidents.

4. Genie Lift Accidents

Although Genie lifts are used in many industries worldwide, they must be managed properly. Otherwise, workers risk Genie lift accidents that put their health and well-being in danger.

OSHA requires businesses to plan for accidents. If your company has aerial lift operators on staff, it must teach them about common accidents. Failure to do so can be costly to your business. It puts your aerial lift operators and others in danger, too. 

san diego aerial lift certification

Why OSHA Aerial Lift Certification Is Key 

Aerial lift operators who lack OSHA-approved training are more prone to accidents than others. They risk operating errors that can lead to aerial lift accidents, along with equipment and property damage. Even worse, aerial lift operator accidents can cause serious injury or death. They can also result in OSHA fines and penalties, brand reputation damage, and revenue losses. 

OSHA certification training won’t stop accidents on aerial lifts. Conversely, the training puts a company and its aerial lift operators in the best position to avoid such issues. 

Certification training provides insights into different types of aerial lift accidents. Upon completion, aerial lift operators can keep an eye out for hazards that can lead to these accidents. 

Furthermore, certification training helps businesses comply with OSHA requirements. The training ensures companies can provide workers with adequate training to guard against accidents on aerial lifts. It eve

Aerial Lift Accident Statistics

Aerial Lift AccidentsThe Center for Construction Research and Training conducts ongoing research into aerial lift accidents, how frequently they occur, and their impact on employers and workers. Some of the Center’s latest research provides insights into aerial lift accidents into the causes of deaths on aerial lifts, along with the trades most frequently involved.

Notable data from this research includes:

– Among trades, electricians (25%) account for the most deaths among professionals using aerial lifts, followed by construction laborers (15%) and electrical power installers and repairers (13%).

– Boom lifts accounted for nearly 70% of aerial lift deaths.

– Scissor lifts accounted for approximately 25% of aerial lift deaths.

Aerial lift operators must work cautiously, regardless of worksite or the type of lift they use. That way, these operators can remain productive without putting themselves or bystanders in danger. They can also avoid common aerial lift accidents.

5 Common Aerial Lift Accidents

The risks associated with using untrained workers on different types of lifts can be significant. To show the dangers of using untrained workers on aerial, boom, and scissor lifts, here’s a look at the five most common accidents at aerial lift worksites:

1. Electrocutions

The number of electrocutions in the construction industry rose 18% year over year, according to the most recent data from the Electrical Safety Foundation International. With a deep understanding of electrocutions, workers can take steps to protect themselves and others against electrocutions and other electrical injuries. 

Electrocutions occur when workers make contact with overhead power lines. They can also happen when a lift makes contact with a power line. 

Telescopic booms have the highest risk of electrical accidents. This is because they are often used to service electrical systems. 

Scissor lift operators often work near or under power lines. They risk getting a fatal electrical shock in many different ways, such as: 

– Operators do not use personal protective equipment (PPE). 

– The lift is unstable. 

– Contact is made with live power lines due to a lift tip-over

Aerial and scissor lift training teaches workers how to assess a work area for overhead live wires and other hazards. In doing so, the training can help workers avoid fatal shocks from power lines.

2. Falls from Aerial Lifts

Aerial lift falls are one of the leading causes of death among construction workers, the U.S. Centers for Disease Control and Prevention (CDC) reports. They are most likely to occur when a worker, aerial lift, or scissor lift is hit by a crane, vehicle, or another object.

Fall protection measures are crucial to limit the risk of falls from aerial lifts. All cables and harnesses must be attached to a lift before starting a job. In addition, when operating a lift, workers must ensure that:

– Access gates are closed.

– The body harness or restraining belt is attached to the boom or bucket with a lanyard.

– They are standing firmly on the floor of the bucket.

– They avoid leaning on or climbing over the guardrails.

OSHA-approved safety training provides tips and strategies to prevent falls from aerial lifts. With a comprehensive aerial lift safety training program, workers can learn which precautions can help them reduce the risk of aerial lift falls and other accidents.

3. Aerial Lift Tip-Overs

Aerial lift tip-overs most often occur when a bucket cable or boom breaks. They can also happen when a bucket falls or a scissor lift tips over.

To avoid these manlift accidents, workers should never:

– Set up an aerial lift between overhead hazards

– Exceed load capacity limits

– Travel to a jobsite with an elevated lift

– Use a lift on uneven terrain

– Raise a platform in windy conditions

Workers can learn how to identify and eliminate aerial lift tip-over risks and other aerial lift accidents, too. In fact, with proper training, workers can learn how to assess a worksite for tip-over hazards that can contribute to boom lift accidents and other workplace dangers.

4. Getting Caught Between a Lift and an Object

Injuries due to contact with objects outside a bucket occur when the bucket is being moved and a worker gets caught between the edge of the bucket and a roof joist, beam, or another object.

To prevent this type of accident, workers should perform a worksite inspection and evaluate their work equipment. Rotating or moving machine parts must be properly guarded, and workers should not wear loose clothing. Also, workers on the ground should remain at a safe distance from the load at all times.

Scissor lift operators should stay clear of overhead hazards like power lines, pipes, and ceilings to minimize the risk of scissor lift accidents as well. Meanwhile, on-foot workers should remain a safe distance from a work area.

Workers can learn about the dangers of getting caught between a lift and an object, how to avoid getting crushed by a lift or overhead objects, and other aerial lift safety tips and strategies as part of an aerial lift certification training program. Best of all, workers who complete this program can learn how to identify aerial lift dangers, eliminate these risks, and prevent accidents.

5. Being Struck by Objects Outside the Bucket

Collapsing materials cause accidents that occur when workers are unaware of their surroundings and make contact with objects that come loose. 

Workers must notify their superiors and stay up to date about any unfinished building materials at a jobsite. They should also take steps to prevent materials from coming loose; if these materials come loose, they could strike people on the platform or on the ground and lead to injuries and fatalities. 

It is important to note that human error can play a role in any of the aforementioned aerial lift accidents, too. For instance, careless aerial lift operators may take shortcuts that inadvertently lead to accidents. Or, lift operators who ignore a jobsite’s rules may cause accidents. 

No one is perfect, but a consistent approach to everyday work can help aerial lift operators minimize the risk of mistakes. When it comes to human error that can lead to aerial lift accidents, training is crucial. Because, if aerial lift operators are properly trained, they will know how to safely use a lift. They can also take precautions to prevent aerial lift accidents.

How to Stay Safe on Aerial Lifts

Aerial lift operators must prepare for accidents. A clear understanding of aerial lift hazards ensures operators can guard against them. 

Also, aerial lift operators must use their machinery carefully. Even a small mistake can cause a major aerial lift accident. By operating an aerial lift with precision, an operator can avoid errors. 

Finally, staying up to date on OSHA certification for aerial lifts is paramount. OSHA certification remains valid for up to three years. Only licensed operators can use aerial lifts at U.S. worksites. If you ensure your operators are in compliance with OSHA standards, you can verify they know how to safely use an aerial lift.

san diego aerial lift certification

Sign Up for Aerial Lift Certification Training from CMO

CertifyMeOnline.net offers a full selection of aerial lift, scissor lift, and mobile elevated work platform (MEWP) training courses

We provide courses to teach entry-level and experienced workers how to operate different types of aerial lifts in accordance with OSHA standards. Each course is designed to teach workers how to address boom lift accidents and other worksite dangers and prevent these issues from becoming recurring problems. And you can enroll your workers in any of our courses at your convenience. 

Many training courses are available that focus on scissor lift accidents and other aerial lift dangers. To learn more, please fill out our online form or call us today at (602) 277-0615.

How to Charge a Scissor Lift: Everything You Need to Know

how long to charge a scissor lift

For those who are uncertain about how to charge a scissor lift, help is available. In fact, workers who complete an OSHA-approved scissor lift certification training program can get the information they need to properly charge an electric lift. Plus, these workers can receive insights into OSHA scissor lift safety requirements, so they can take appropriate precautions to guard against lift accidents, injuries, and fatalities.

How to Charge a Scissor Lift Safely

Here are five tips for how to charge a scissor lift without damaging the machine or putting others in danger.

1. Park the Scissor Lift 

Ensure the scissor lift is parked in a designated work area. Verify this area is well-ventilated and provides quick, easy access to an electrical outlet. 

2. Turn the Lift-Off

Power down the scissor lift. Also, activate the lift’s emergency shut-off switch; this prevents another operator from unknowingly driving away in the lift while the machine is charging. 

3. Connect the Lift to a Battery Charger

Find the battery charger in the scissor lift. Oftentimes, the charger is located on the right side of the lift’s base. But, there may be instances in which the charger is mounted in the lift’s rear. From here, plug the charger into an AC extension cord and plug the cord into an electrical outlet. Keep the length between the electrical cord and charger as short as possible. This minimizes the risk of damage if the cord inadvertently gets run over while the charger is in use. 

4. Confirm the Charger Is Working

Look at the scissor lift’s battery charger and verify its light is illuminated. Once a lift is fully charged, the light will typically turn green. At this point, the charger will automatically shut off, too. 

In older scissor lift models, there may be a meter that displays voltage. With these models, the voltage will read zero when the lift is fully charged. 

5. Disconnect the Charger

Unplug the battery charger as soon as the scissor lift is fully charged. 

How Long Does a Scissor Lift Take to Charge?

How to Charge a Scissor Lift Your workers may wonder how long does a scissor lift take to charge — and rightfully so. If they know the ins and outs of charging a scissor lift, they can ensure their lift has sufficient battery power throughout the work day.  

The length of time it takes to charge a scissor lift varies. In some instances, it can take about six hours to charge a lift before an operator can use it for a full work day. Comparatively, Genie lifts and other types of electric aerial work platforms (AWPs) can take approximately 12 to 16 hours to charge. 

It may be possible to use a scissor lift while the machine is being charged, too. However, those who do so must take proper precautions. That way, they can avoid scissor lift accidents, injuries, and fatalities.

If there are concerns regarding how to charge a scissor lift, review the owner’s manual. Here, scissor lift operators can find plenty of information about how to correctly recharge their equipment. They can also get information about a scissor lift’s battery life. 

How Long Do Scissor Lift Batteries Last?

The lifespan of scissor lift batteries depends on how often the equipment is used. For instance, a lightly used battery may perform as expected for many years. On the other hand, a battery that needs to be frequently recharged may last anywhere from six to 48 months. 

Scissor lift operators can prolong a battery’s lifespan. To do so, they can perform the following routine battery maintenance:

  • – Look for corrosion beneath a battery’s rubber grommets 
  • – Remove a filler cap and top off a battery as needed 
  • – Eliminate dirt and debris from a battery bank 
  • – Conduct battery charge tests

Battery inspections and testing is a key part of scissor lift maintenance. Examine a scissor lift’s battery regularly. If there are any signs of battery damage or wear and tear, address them immediately. 

Where Do You Plug in a Scissor Lift to Charge?

A scissor lift operator can plug their equipment’s battery charger into an AC wall outlet. From here, the operator should give the battery sufficient time to charge. 

Follow the scissor lift manufacturer’s requirements for plugging in scissor lift batteries. These may include:

  • Avoid using an external charger or booster battery
  • ○ Charging a scissor lift in a well-ventilated area
  • ○ Using the proper AC input voltage for charging as designated on the battery charger; 
  • ○ Utilizing a battery and charger that is appropriate based on the scissor lift’s make and model

Scissor lift operators can sometimes use a generator to recharge their equipment, too. 

Can You Use a Generator to Charge a Scissor Lift?

There may be times when there is no plug-in power to charge a scissor lift. In these instances, an operator can utilize a generator to recharge their lift’s battery. 

As always, safety is key when it comes to how to charge a scissor lift. If a generator is used, take appropriate safety precautions. This ensures a scissor lift operator can safely use a generator to recharge their equipment. 

san diego aerial lift certification

Teach Workers How to Charge a Scissor Lift

If your business uses electric scissor lifts, you need to teach your workers how to charge a scissor lift safely. Fortunately, CertifyMeOnline.net offers a convenient and affordable scissor lift safety certification program for workers of all skill and experience levels. 

Our online certification program provides insights into the different types of scissor lifts and how to safely use and maintain them. Upon completion of our program, your workers can serve as OSHA-compliance scissor lift operators. Your scissor lift operators can take advantage of our renewal certification training every three years as well. 

To learn more about our scissor lift certification training or to enroll your workers in it, please contact us online or call us today at (602) 277-0615.

Why Wear Protective Eyewear

Construction workers face many workplace hazards. One such issue that continues to plague construction companies and their employees: poor eye protection. 

If you operate a construction company, you need to offer safety glasses to your workers. Construction safety glasses can help your employees guard against dirt, debris, and other foreign particles. They can even help you avoid on-the-job accidents, injuries, and fatalities. 

Are You Required to Provide Construction Safety Glasses?

Construction site safety is crucial. As part of its efforts to ensure worksites are safe, OSHA requires construction companies to provide their employees with safety glasses and other eye protection. 

According to OSHA standard 1926.102, construction businesses must supply safety glasses or other eye protection to workers exposed to any of the following hazards:

  • – Airborne particles
  • – Molten metal
  • – Liquid chemicals 
  • – Acids or caustic liquids
  • – Chemical gases or vapors
  • – Potentially dangerous light radiation

These businesses and their employees can benefit from construction safety glasses. For businesses, they can provide glasses to comply with OSHA requirements and avoid fines and penalties. And for their employees, they can protect their eyes against a variety of dangers and complete everyday tasks as planned.  

aerial lift certification

Find OSHA-Approved Construction Safety Glasses

OSHA standard 1910.133 describes the agency’s requirements for construction safety glasses. If safety glasses have earned OSHA approval, they have been tested against this standard. 

To find out if construction safety goggles, glasses, or other eye protection is OSHA-approved, look at the lens. OSHA-compliant eye protection has markings specified by the American National Standards Institute’s ANSI Z87. 1-2010 standard. These markings are located on both lenses and the frame. 

Meanwhile, certain lenses may be “Impact Rated.” These lenses have passed high-mass and high-velocity tests and provide eye protection from the side. They have a manufacturer’s mark, along with a “+” sign. 

Can Construction Workers Wear Prescription Eyewear?

There may be times when construction workers require prescription eyewear. In these instances, construction employees still need OSHA-approved eye protection. 

Not all prescription lenses are shatterproof. These lenses may provide only a limited amount of frontal protection. As a result, small particles can reach the eyes and damage them, even if construction workers are wearing their prescription eyewear. 

For workers in construction and other industries who wear prescription eyewear, they can pick up over-prescription safety glasses. This ensures workers can wear eyeglasses that help them maintain clear and avoid eye injuries. 

Of course, it pays to teach all workers about eye injuries and other on-the-job dangers. By prioritizing eye safety, you can ensure your employees can maintain a safe and productive workspace.

Eye Safety Facts for Employers

Our eyes are perhaps our most important sensory organ. So, it makes sense to take care of them at work with glasses.

The National Institute for Occupational Safety and Health (NIOSH) reports that around 2,000 workers suffer job-related eye injuries every day in the U.S. Many of these injuries are serious enough to require medical treatment.

Poor eye protection safety also has a major economic impact. Each year, eye injuries result in more than $300 million in medical costs, workers compensation claims, and lost time on the job. Plus, most on-the-job eye injuries occur due to the fact that workers weren’t wearing goggles or glasses or were wearing inadequate eye protection for the job.

Many eye injuries are minor, but even these injuries can result in long-term vision problems. Some minor eye injuries can escalate and cause long-lasting damage, and the most serious eye injuries can blind a worker.

Although eye injuries are problematic, they may be preventable. In fact, OSHA estimates that up to 90% of eye injuries can be prevented by wearing proper safety eyewear.

How and Why Do Eye Injuries Occur?

Most job-related eye injuries occur when small objects land in the eye. These include things like dust, wood chips, and metal slivers.

Other causes of eye injuries include:

– Nails, staples, or metal scraps that pierce the eyeball

– Blunt force trauma from falling objects

– Workers running into an object face first

– Splashes from chemicals or cleaning products

– Thermal or radiation burns that occur while welding

– Spending extended periods of time working at a computer

OSHA requires workers to wear eye and face personal protective equipment (PPE) under two conditions. One is when eye safety hazards exist on a jobsite. The other is when it is likely that wearing eye safety PPE could prevent an injury.

Common Eye Protection Safety Hazards That Require PPE

The following eye protection safety hazards are present in a wide range of work environments:

– Projectiles, including dust, metal, and wood

– Chemicals in liquid or gas form

– Radiation, especially UV, infrared, and lasers

– Harmful pathogens from blood and body fluids

Workers may require construction safety glasses or other PPE for the eyes to safely complete tasks in settings where one or more of the aforementioned hazards are present.

Are Construction Safety Glasses Necessary?

The PPE to be worn depends on the type of hazards present in a work environment. Some worksites include more than one eye hazard, and proper eye safety protection must account for all on-the-job hazards.

construction safety glassesWorkers in some industries have a higher risk for eye injuries than others. These industries include:

  • – Construction
  • – Manufacturing
  • – Mining
  • – Welding
  • – Carpentry
  • – Electrical work
  • – Auto repair
  • – Plumbing
  • – Maintenance

Employers in any of these industries must provide their workers with the proper eye protection. That way, these employers can help their workers see clearly and limit the risk of eye injuries at work.

Does Your Business Need an Eye Safety Program?

Eye safety should be an integral part of every company safety program. Your workplace safety manual should cover all OSHA eye protection guidelines and contain guidance on:

– When to wear eye protection

– What type of eye PPE to wear (based on the job)

– How and where workers can get the PPE eyewear they need

– Consequences of eye safety violations

To select the right eye safety PPE for each job, list all potential eye hazards. Then, look at how workers are exposed to these hazards. Take into account the personal vision needs of each worker. 

Also, consider whether other types of PPE are used. PPE eyewear needs to fit snugly but comfortably. If not, it should be adjustable, so it can provide full eye protection. Eye PPE also should not disrupt employees’ peripheral vision.

Different Types of Eye Safety PPE

Eye safety PPE ranges from basic safety glasses to special protection devices for high-risk jobs. Common eye PPE includes:

1. Eye Safety Glasses

Work safety glasses resemble reading glasses but have a stronger frame and lenses. They are well-suited for jobs where dust, debris, and other flying particles are present. Side shields and wraparound safety glasses can provide extra protection.

2. Safety Goggles

Construction goggles protect against impact, dust, and chemical splashes. These goggles feature a secure shield around the entire eye that protects against hazards coming from all directions. They can be worn over contact lenses and regular glasses.

3. Face Shields and Helmets

Face shields and helmets are designed for high-risk jobs in which employees may be exposed to chemicals, heat, or bloodborne pathogens. Some helmets are made exclusively for welding or working with other molten materials. Protective eyewear should always be worn underneath shields and helmets. This helps protect the eyes when the shield is lifted or the helmet removed.

4. Special Protection

Some helmets or goggles have special filters to protect against radiation exposure. These are used for welding or working with lasers. Safety glasses should be worn underneath for full protection. Other eye safety equipment includes machine guards, screened or divided workstations, and other engineering controls.

To determine which eye safety equipment best suits your business, you should evaluate OSHA guidelines. You can also enroll your workers in a safety training program to teach them how to correctly wear eye PPE.

How to Get Workers to Buy Into Eye Safety

Many workers don’t like wearing protective eye gear. Some say eye PPE is uncomfortable, while others feel it interferes with their vision. Still, others think it looks “uncool” to wear eye protection. 

Providing workers with comfortable and stylish eye safety PPE will increase adoption rates across your workforce. At the same time, it will help lower the risk of eye injuries. Eye safety PPE must be comfy enough to wear for an entire shift, even in hot weather. Features that enhance comfort include:

– Cushioned brows

– Soft gel nosepieces

– Padded nose bridges

– Vented frames

– Flexible temples

– Lenses that can be adjusted to different angles

Workers may also like anti-fogging features and lenses surrounded by foam. These features improve comfort and provide extra protection against foreign particles.

Workers are more likely to wear stylish eye safety glasses, too. Features such as bright colors, wraparound designs, and mirrored lenses enable workers to personalize their eye safety glasses.

When it comes to eye protection, style and comfort are important, but they are secondary to safety. For instance, eye protection features like lenses that can resist impact and protect against UVA and UVB rays can make a world of difference for employees.

Furthermore, eye goggles and glasses made with tempered glass or acrylic plastic lenses should not be used in high-impact situations. Also, these types of eye protection should not be used in areas where there is significant debris. In high-impact work areas, polycarbonate lenses that resist scratching are the best choice.

Promote Eye Protection at Your Worksite

Eye safety is a team effort, and employers are responsible for:

– Complying with all OSHA eye safety standards

– Conducting a workplace eye hazard assessment

– Removing or reducing eye hazards where possible

– Providing the right safety eyewear and making sure workers wear it

Meanwhile, workers are responsible for:

– Knowing the eye hazards associated with their jobs

– Wearing proper eye safety PPE to protect against on-the-job hazards

– Keeping their safety eyewear in good condition

– Replacing defective eyewear

Both employers and workers need to know what to do when an eye injury occurs. This starts with seeking medical attention as soon as possible — especially if there is pain in the eye or blurred vision. 

Apply basic first aid until medical help arrives or the victim is taken to an emergency room. For chemicals in the eye, flush with water for at least 15 minutes; for employees who wear contact lenses, their lenses should be removed before flushing. Don’t attempt to neutralize the chemical with other substances, and don’t bandage the eye. 

For particles in the eye, don’t rub it. Instead, see if tears can wash away any particles in the eye. If not, apply an over-the-counter tear solution. Gently lift the upper eyelid out and down over the lower eyelid to remove any particles. If particles remain, keep the eye closed and bandage it. Then, get medical help as soon as possible. 

And for blows to the eye, apply a cold compress to reduce pain and swelling. For cuts or punctures to the eye, do not rinse it. Also, don’t try to remove an object stuck in the eye. Instead, cover the eye with a rigid shield. Next, seek medical care.

aerial lift certification

Choose CertifyMeOnline.net for Workplace Safety Training

Eye safety is merely one element to consider to create a safe, productive, and efficient work environment for all employees. For instance, your business employs workers who use aerial lifts, you may require aerial lift safety training.

CertifyMeOnline.net is a leading provider of affordable aerial lift safety training for workers of all skill levels. We make it quick and easy for workers to learn the ins and outs of safely operating boom lifts, scissor lifts, and other types of aerial lifts. To find out more about our aerial lift safety training program, please contact us online or call us today at (602) 277-0615.